F-16 Have Glass(comparing shades)

F-16 Have Glass(comparing shades)

All the U.S. “Wild Weasel” F-16s are being given a new paint job similar to the one of the.F-35 Joint Strike Fighter.
It is called “Have Glass 5th generation”

Have Glass is the code name for a series of RCS reduction measures for the F-16 fighter. Its primary aspect is the addition of an indium-tin-oxide layer to the gold tinted cockpit canopy.

The primer of F-16 it is one Yellow green

This is reflective to radar frequencies, while it may seem odd, adding a radar reflective coating actually reduces the plane's visibility to radar

HAF F-16 block 52+ Have Glass II

(F-16 block 52+ advanced) Not sure if it's exactly the same stuff as the F-22 but it's applied with the same CASPER (Computer Aided Spray Paint Expelling Robot) system used for the F-22 so I’d be guessing yes.

I will share with you these close-ups

Here we see Greek F-16s. In position (1,4) is F-16 block 52+ advanced.In position (2,3) F-16 block 52+ and in the distance, in position( 5) is a F-16 block 50 three generations. They have the same camouflage " Ghost "

F-16 block 30 (RAM) Radar absorbent material."We can paint mixing little white"

HAF F-16 block50 (RAM)"Radar absorbent material"

HAF F-16 Block 52+ Have Glass II

USSAF This F-16 CJ 30 He has upgraded and paints Have Glass II

shall report separately F-16 CM 50 & F-16 Block 52+ Have GlassII

1o" I sprayed stainless steel foremost(substrate. Stainless Steel .MODEL MASTER) "enamel."

2o" I mixed these (camouflage)enamel colors with stainless steel with 50-50 and sprayed

3o"The next step was the most important, they are mixed lighter and darker gray in the basic gray metallic and carefully sprayed with 0.2 mm airbrush. They sprayed the darker it lighter

Then I mixed in some brown base color and sprayed, and more (HUMBROL Metal cote27003 metallic)(Humbrol Metal-Cote "Gunmetal 27004) "enamel. " camouflage and lighter gray metal panels for some lines and panels.

finish

rubbed on a tissue or soft cloth piece, and then the friction on the tissue / fabric gently rubbed onto the model again ended with satin lacquer.

F-16 Block 52 advanced. Sprayed stainless steel foremost (substrate. Stainless Steel .MODEL MASTER)

"Have Glass 5" Mixing these camouflage enamel colors, with stainless steel with a ratio of 50-10 and sprayed.The procedure is almost identical .Rubbed on a tissue or soft cloth piece, and then the friction on the tissue / fabric gently rubbed onto the model again ended with satin lacquer.